TV Make	TV Model	Problem	Solution
RCA	CTC170	SET HAS NO POWER/FUNCTIONS	CR4151
RCA	CTC170	VIDEO POOR/MISSING. PICTURE DARK WITH FLASHING RASTER.	SUSPECT Q2510
RCA	CTC170	NO POWER UP...INTERMITTENT.	U4150
RCA	CTC175	POOR OR LOW AUDIO.	SHORTED Q1903...REPLACE
RCA	CTC175	UNIT IS DEAD	Y3101
RCA	CTC175	AUDIO LEVEL TOO LOW.	CHECK CBE
RCA	CTC176	AUDIBLE SQUEELING FROM UNIT ON POWER ON.	CHECK AND REPLACE CR4403/C4407
RCA	CTC176	INTERMITTENT POWER ON/OFF.	RESOLDER GROUND AT IR3401 ,U3101
RCA	CTC177	VIDEO AND AUDIO MISSING.	TAB AT J3
RCA	CTC177	UNIT IS DEAD	U3101
RCA	CTC177	NO VERTICAL...SINGLE LINE ON SCREEN.	C4501 BAD
RCA	CTC177	NO VIDEO...AUDIO OK	COLLECTOR OF Q5004 OPEN...REPLACE
RCA	CTC177	KEYBOARD FUNCTIONS INOPERATIVE	REPAIR TRACE R3332 C3303 R3314
RCA	CTC177	OSD IS FLUCTUATION THROUGHOUT SCREEN..	CR3302
RCA	CTC177	AUDIO IS POOR ON SELECTED CHANNELS.	R7521
RCA	CTC177	SNOWY PICTURE WITH INTERMITTENT AUDIO DISTORTION	OPEN R4517
RCA	CTC177	VIDEO IS SMEARING...LOOKS LIKE BAD PICTURE TUBE.	U1001
RCA	CTC177	EXCESSIVE PICTURE FLICKERING/JUMPING.	SOLDER AT R293
RCA	CTC177	OSD DISTORTED AND SHIFTED TO THE LEFT.	CHECK U3201 FOR DEFECT
RCA	CTC177	UNIT WILL NOT GO INTO AUDIO MUTE WHEN SELECTED.	CHECK AND REPLACE C1909 & R1908
RCA	CTC177	OSD COMPLETELY MISSING.	CR4104
GE	CTC175	AUDIO WON'T GO ALL THE WAY UP	CUT PC TRACE GOING TO EMITTER OF Q1903
GE	CTC175	VERT DOWN FROM TOP (INT) AND SNOWY PIX (INT). TAPPING AFFECTS	SOLDER BAD AT MICROPROCESSOR SHIELD AND TUNER GROUNDS UNDER BTM COVER.
GE	CTC177	AUDIO NOT LOUD ENOUGH	CUT PC TRACE GOING TO EMITTER OF Q1903
RCA	CTC177	SET IS DEAD	CHECK FOR SHORTED CR4704 AND OPEN R4702, R4517 (RESISTORS SHOULD BE OEM ONLY)
RCA	CTC175A	NO AUDIO/VIDEO...HAS RASTER...3.4V PRESENT AT 5V SOURCE	REPLACE ZENER CR4101 (OFF COLLECTOR OF Q4103)
RCA	CTC175	INTERMITTENT POWER ON	CHECK FOR BAD CR3101 IN MICROPROCESSOR CIRCUIT (164874)
RCA	CTC177	INTERMITTENT DARK PICTURE	REPLACE FLYBACK-SCREEN CONTROL BAD OEM# 215539