How to Program your One For All® remote

( URC-4060/4061)

Set Up

After getting the proper codes from your manual or Customer Service, use the following instructions to enter them into your remote.

  1. Press the device you want to program, then release.
  2. Press and hold the SETUP button until the red LED flashes twice, then release.
  3. Enter your 3 digit code.
  4. You should receive 2 quick flashes after entering your code.
    Write the code that worked your device down and put it somewhere safe. (i.e. on the back of the TV).

Blinking Back the Code:

This is useful if your remote is still working but you have forgoten what device code you are using.
  1. Tap the device Key - Release
  2. Hold "SETUP" until it blinks twice - release.
  3. Press 9 - 9 - 0.
  4. Press 1, Count the number of blinks. (1st digit)
  5. Press 2, Count the number of blinks. (2nd digit)
  6. Press 3, Count the number of blinks. (3rd digit)
If the remote DOES NOT blink it means the number is 0.

Redefining a key

  1. Hold "SETUP" Until it blinks twice.
  2. press 9 - 9 - 2.
  3. press the DEVICE key you want moved
  4. press the DEVICE key you want to replace.
Example: If you want the Aux key to be a TV key:
"SETUP" (2 blinks) 9 - 9 - 2, TV (you want to move TV)
Then AUX (you want to replace AUX).

Punch Through

This sets Volume to work for one device in all modes.
For example, the TV volume will work in the cable and VCR modes.
  1. Hold "SETUP" until it blinks twice - release.
  2. Press 9 - 9 - 3.
  3. Press the device key you would like the volume to come from.
You will get two blinks on the remote.
If you want to set the volume for a device to work just one or two other devices- refer to the instructions under "KEYMOVER-From one button to another"

Volume Default

Use this to get Cable or VCR volume to work.
  1. Hold SETUP until it blinks twice - release.
  2. Press 9 - 9 - 3
  3. press the VOLUME key, you will get two blinks.
Now The volume is set for all original devices.

Clearing Out

A Device Key - Or Another Button

  1. Tap the device Key - release.
  2. Hold SETUP for Two blinks - release.
  3. Press 9 - 9 - 2
  4. Press the button twice. - Two blinks.

Favorite Channel Keys

Your One For All® 4 Device is equipped with a favorite channel key ( FAV CH ). You can set up the FAV CH key with a list of up to 10 of your favorite channels on either your TV or your Cable Box/Satellite/DSS.
NOTE: The FAV CH key can only be set up for one device (TV,CABLE, SAT) at a time. You cannot set up a favorite channel on another device key until you have cleared the FAV CH of your original list.
  1. Press the device key, (TV, VCR, or CBL/SAT), for the device that will contain your favorite channel list.
  2. Press and hold SETUP until the remote blinks twice. Release SETUP and press 9-9-6.
  3. Enter the channel number of the channel would like to add to your favorite channel list. Then press SETUP .
  4. Continue adding your favorite channels up to 10 channels. Once you have finished, press and hold SETUP until the remote's red light blinks twice.
  5. To scan through your favorite channel list, press FAV CH . Your One For All® 4 Device will automatically scan through your favorite channel list, stopping on each channel for three (3) seconds.
  6. To stop at one your favorite channels, press any key on the One For All® remote.

To clear an entire favorite channels list from the FAV CH key.

  1. Press and hold SETUP until the remote's red light blinks twice, then release SETUP .
  2. Press 9-9-6 then press and hold SETUP until the remote's red light blinks twice.
Left Arrow Mail